Nature 2003, 423:136–137.CrossRef 3. Aksu S, Huang M, Artar A, Yanik AA, Selvarasah S, Dokmeci MR, Altug H: Flexible plasmonics on unconventional and nonplanar substrates. Adv Mater 2011, 23:4422–4430.CrossRef 4. Tai YL, Yang ZG, Li ZD: A promising approach to conductive patterns with high efficiency for flexible electronics. Appl Surf Sci 2011, 257:7096–7100.CrossRef 5. Danilo DR: Electronic textiles: a logical step. Nat Mater 2007, 6:328–329.CrossRef 6. Nishide H, Oyaizu K: Toward flexible batteries. Science 2008, 319:737–738.CrossRef 7. Magdassi S, Grouchko M, Berezin O, Kamyshny A: Triggering the sintering of silver nanoparticles at room temperature. ACS Nano 2010, 4:1943–1948.CrossRef 8. Siegel AC,
Phillips ST, Dickey MD, Lu N, Suo Z, Whitesides GM: Foldable printed circuit boards on paper substrates. Adv Funct
Mater 2010, 20:28–36.CrossRef 9. Jeong AG-881 mw GS, Baek DH, Jung HC, Song JH, Moon JH: Solderable and electroplatable flexible electronic circuit on a porous stretchable elastomer. Nat Commun 2012, 3:977–981.CrossRef 10. Li Z, Zhang R, Moon K-S, Liu Y, Hansen K, Le T, Wong CP: Highly conductive, flexible, polyurethane-based adhesives for flexible and printed electronics. Adv Funct Mater 2012. 11. Liu X, Long YZ, Liao L, Duan X, Fan Z: Large-scale integration PRIMA-1MET of semiconductor nanowires for high-performance flexible electronics. ACS Nano 2012, 6:1888–1895.CrossRef 12. Li Y, Wu YL, Ong BS: Facile synthesis of silver nanoparticles useful for fabrication of high-conductivity elements for printed electronics. J Am Chem Soc 2005, 127:3266–3267.CrossRef 13. Jeong S, Woo K, Kim D, Lim S, Kim JS, Shin H, Xia YN, Moon J: Controlling the thickness of the surface oxide layer on Cu nanoparticles
for the fabrication of conductive structures by ink‐jet printing. Adv Funct Mater 2008, 18:679–686.CrossRef 14. Michael CM, Habib A, Wang D, James RH: Highly ordered 3-Methyladenine manufacturer nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors. Nat Mater 2007, 6:379–384.CrossRef 15. Peng R, Xia C, Peng D, Meng G: Effect of powder preparation on (CeO 2 ) 0.8 (Sm 2 O 3 ) 0.1 thin film properties by screen-printing. Mater Lett 2004, 58:604–607.CrossRef 16. Pudas M, Halonen P, Vähäkangas J: Gravure printing of Pregnenolone conductive particulate polymer inks on flexible substrates. Prog Org Coat 2005, 54:310–318.CrossRef 17. Moonen PF, Yakimets I, Huskens J: Fabrication of transistors on flexible substrates: from mass-printing to high-resolution alternative lithography strategies. Adv Mater 2012, 24:5526–5541.CrossRef 18. Park S, Lee HW, Wang H, Selvarasah S, Dokmeci MR, Park YJ: Highly effective separation of semiconducting carbon nanotubes verified via short-channel devices fabricated using dip-pen nanolithography. ACS Nano 2012, 6:2487–2491.CrossRef 19. Guo LJ: Nanoimprint lithography: methods and material requirements. Adv Mater 2007, 19:495–513.CrossRef 20.