Then ratio of water and methanol was changed

Then ratio of water and methanol was changed LY294002 in vivo to 40:60, peaks of both drugs were observed with good resolution without peak broadening, tailing, fronting and with

good sensitivity as well, at 35 °C temperature and flow rate of 0.7 ml/min. The effect of flow rate on the separation of peaks was studied by varying the flow rate from 0.5 to 1.0 ml/min; a flow rate of 0.7 ml/min was optimal for good separation and resolution of peaks in a reasonable time as shown in Fig. 2. The effect of flow rate on the formation and separation of peaks was studied by varying the flow rate from 0.5 to 1.0 ml/min; a flow rate of 0.7 ml/min was optional for good separation and resolution of peaks in a reasonable time. System suitability parameters with peak purity data are given in Table 1 and Fig. 2 shows the chromatogram for working standard mixture of DKP and TCS, respectively. The method was validated according to ICH guidelines. The following validation characteristics were addressed: linearity, range, accuracy, precision, specificity,

sensitivity (LOQ and LOD) and robustness. Specificity of the method was determined by analyzing samples containing a mixture of the drug product and excipients. All chromatograms were examined to determine if DKP & TCS. Linearity was determined for DKP in the range of 3.125–125 μg/ml and for TCS 0.5–20 μg/ml. The correlation coefficient (‘r2’) values were >0.998 (n = 6) indicating an excellent correlation between peak areas and analyte concentrations. Low values of LOD and LOQ indicate sensitivity of method. The LOD and LOQ values were found to be 2.5 and 0.4 μg/ml, Decitabine mouse 7.5 and 1.2 μg/ml for dexketoprofen and thiocolchicoside,

respectively. The assay for the marketed tablets was established tuclazepam with present chromatographic condition developed and it was found to be more accurate and reliable. The average drug content was found to be 99.92 %for DKP, 99.58 %for TCS for batch A and 99.71% for DKP, 99.65% for TCS for batch B of the labelled claim. With % RSD for DKP, 0.23–1.23 batch A, 0.43–1.2 batch B and 0.49–1.43 batch A, 0.69–1.33 batch B for TCS respectively. All the above values were found to be within specification as recommended by ICH guidelines and results of formulation analysis are given in Table 2. The mean percentage recoveries obtained were 99.54%, 98.50% for DKP and TCS and % RSD for DKP, TCS were 0.32–0.84 and 0.49–0.81, respectively. The developed method was found to be accurate as the mean percentage recoveries obtained for DKP and TCS were found to be within limit of 100 ± 1.5 %and % RSD values for DKP and TCS were <2%, as recommended by ICH guidelines. The intra-day and inter-day variation was calculated in terms of percentage relative standard deviation and the results are given in Tables 3 and 4 for DKP and TCS, respectively. The % RSD was found to be in the range of 0.53–1.47 for intra-day, 0.38–1.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>